Dust suppression system for construction companies and developers
An effective solution for clean air and dust reduction at construction sites
Form for construction companies and developers
To receive a consultation on the systems, please fill out the form with your contact details — a specialist will contact you within 24 hours.
During the construction of residential complexes, commercial buildings, and infrastructure, a large amount of dust is inevitably generated. It negatively affects the health of workers and nearby residents, worsens the environmental situation, reduces work quality, and may lead to fines from environmental authorities.
A dust suppression system is a modern solution for developers, allowing control of dust levels on construction sites, minimization of harmful emissions, and compliance with sanitary and environmental standards.
A dust suppression system is a modern solution for developers, allowing control of dust levels on construction sites, minimization of harmful emissions, and compliance with sanitary and environmental standards.
The best way to prevent the spread of dust is to install a dust suppression and misting system.
Why is it important to control dust at construction sites?
Human health: dust contains fine particles (PM2.5 and PM10) that cause respiratory diseases.
Site safety: settling dust reduces visibility, hindering both machinery and workers.
Legal risks: violations of sanitary and environmental standards may result in fines and work stoppages.
Developer reputation: a clean and safe construction site increases trust among future residents and investors.
Where is it used?
Site safety: settling dust reduces visibility, hindering both machinery and workers.
Legal risks: violations of sanitary and environmental standards may result in fines and work stoppages.
Developer reputation: a clean and safe construction site increases trust among future residents and investors.
Where is it used?
- Residential complexes and cottage settlements
- Construction sites within city limits
- Commercial real estate projects
- Demolition and reconstruction of old buildings
- Road and infrastructure construction
Principle of operation of a high-pressure misting system
The main unit purifies the water and supplies it at a pressure of 4–6 MPa. Through special nozzles, the water flow changes speed and distribution across the jet cross-section, causing large droplets to break up into tiny particles.
Under the influence of aerodynamic forces, these particles further split into countless droplets with a diameter of 10–20 microns, forming a “fine mist.” A single mist particle can absorb up to 60 dust particles, preventing their spread.
This mist remains suspended in the air, capturing dust particles and transforming water from liquid to gaseous state, increasing air humidity and effectively purifying it.
The main unit purifies the water and supplies it at a pressure of 4–6 MPa. Through special nozzles, the water flow changes speed and distribution across the jet cross-section, causing large droplets to break up into tiny particles.
Under the influence of aerodynamic forces, these particles further split into countless droplets with a diameter of 10–20 microns, forming a “fine mist.” A single mist particle can absorb up to 60 dust particles, preventing their spread.
This mist remains suspended in the air, capturing dust particles and transforming water from liquid to gaseous state, increasing air humidity and effectively purifying it.
Composition of the misting system
Main components:
Main components:
- High-pressure compressor
- Next-generation nozzle with a built-in filtration system and a rotating head
- Filtration system: three-stage filtration or fine stainless-steel filtration
System — "Flying Eagle Dust Reduction"
Dust suppression, environmental control
The Flying Eagle system is widely used in raw material warehouses, factory workshops, road network areas, near stations and ports, coal mines, mining enterprises, as well as in enclosed production facilities.
The system supports configuration of up to 9 time intervals per day and can be controlled via a mobile device. It does not require constant operator presence.
The intelligent platform is equipped with notifications for filter replacement, oil changes, and other consumables.
The system supports configuration of up to 9 time intervals per day and can be controlled via a mobile device. It does not require constant operator presence.
The intelligent platform is equipped with notifications for filter replacement, oil changes, and other consumables.
According to test results and practical application, the Flying Eagle system can effectively reduce airborne dust concentration in an area by 80%–90%.
It generates a large number of micron-sized water droplets that adsorb dust particles in the air, providing a significant dust suppression effect, especially in large open spaces.
Depending on specific requirements, the system can be individually programmed and configured for different operating modes.
It generates a large number of micron-sized water droplets that adsorb dust particles in the air, providing a significant dust suppression effect, especially in large open spaces.
Depending on specific requirements, the system can be individually programmed and configured for different operating modes.
Advantages of misting systems
The misting system has proven itself as a reliable dust suppression method. Its advantages include:
-
Ease of useThe droplet size of the mist is approximately 10–20 microns (0.01–0.02 mm), which is smaller than in most other methods — for example, with water cannons or sprinkling, which can actually raise dust back into the air. This reduces labor costs, as the system does not require constant personnel involvement — unlike traditional methods, where two people must operate each nozzle and simultaneously monitor the process. -
SafetyThe water used in the system is safe for people and the environment. The fine droplet size reduces splashing on workers or nearby objects. Compared to methods such as rough cleaning or mechanical sweeping, there is no eye irritation and no health risks, since operators do not come into contact with toxic substances (such as chlorine-based bleaches, ammonia, hydrochloric acid, boron minerals, etc.) that are sometimes used for dust suppression. -
DurabilityThe design of our systems allows them to operate continuously for several years with minimal maintenance costs, unlike mechanical systems. Stainless-steel nozzles with swivel joints ensure easy servicing. -
EfficiencyDust suppression through misting achieves results that are difficult to reach with other methods. The system reduces dust levels and creates comfortable working conditions. The effect becomes noticeable within just a few minutes or hours after activation (depending on weather conditions). -
Low water consumptionThe system provides optimal pressure across the entire spray height, allowing coverage of areas from 500 to 4,000 m². Water consumption is adjustable from 100 to 1,600 kg/h depending on the task. At the same time, hourly water usage can be as low as 2.5 liters per nozzle — significantly lower than that of standard systems. -
Minimal maintenance costsAfter installation, the system requires very little maintenance and has fewer components than most types of dust suppression equipment. There are no meshes, hoses, or complex fittings as in watering machines. -
Low operating costsMisting systems operate more economically than, for example, spraying with lime or water. The fine droplets do not wet or damage equipment, tools, or materials, allowing work to continue without delays. -
Unlimited scope of applicationThe systems can be used both indoors and outdoors, providing flexibility and minimizing work interruptions. -
Instant resultsWhile other methods may require up to 24 hours for the air to clear, with a misting system the results are visible in less than an hour. -
No residual contaminationUnlike chemical dust suppressants, the system leaves no residue that could damage equipment or cause malfunctions.
System installation
Installing a misting system is a complex process that requires expertise. The best option is to turn to specialists. Our company has been designing and installing such systems for over 10 years, ensuring fast, efficient, and high-quality results for all types of private and commercial facilities.
Installing a misting system is a complex process that requires expertise. The best option is to turn to specialists. Our company has been designing and installing such systems for over 10 years, ensuring fast, efficient, and high-quality results for all types of private and commercial facilities.
Contact the company
We offer not just technology — we offer an investment in the future, environmental protection, comfort and safety for city residents and visitors, and welcoming green spaces.
Fill out the form to get a consultation.
Fill out the form to get a consultation.
Navigation
Contacts
Follow us
© All rights reserved
Contact the company
To receive a consultation on the systems, please fill out the form with your contact details — a specialist will contact you within 24 hours.